HouseMate Home Control

中国
开发者
Brian Dillon
App ID
分类
生活
价格
免费
最新版本上线日期
2021年11月29日 
App Store打开 
版本记录
更新内容对比
  • 全球最早版本上线日期
    2015-11-13
  • 最新版本
    3.10
  • 最新版本上线距今
    4天16小时
  • 近1年版本更新次数
    1

版本时间线

T鼠标悬停“更新节点”,查看更新内容。点击“更新节点”可查看更新前后内容对比
版本更新
显示内容
日期
  • -
2021年
9月
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
10月
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
11月
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
12月
1
2
3

版本记录

  • 版本3.10
    2021-11-29
    更新日志

    Optimised for iOS Voice Control

    截图
    应用描述

    Imagine being able to control everything from one device: Turn on your room lights and close the curtains. Change channels on your TV and turn up the heating. Answer a phone call and send some texts. Browse the Internet, play some music or watch YouTube. HouseMate hardware in combination with an iOS device enables you to do this and much more.
    HOW DOES IT WORK?
    HouseMate is a combined hardware/app solution that enables a switch user to fully control their iOS device and use it to operate other equipment in their home or work environment using a combination of InfraRed, HomeKit, IFTTT and other technologies.
    TELL ME ABOUT
    THE HARDWARE
    The hardware is controlled using the built-in switch or by connecting an external switch or joystick. It can also be interfaced to R-Net and DX wheelchair control systems.
    It is powered by a rechargeable Li-Ion battery and contains a powerful omni- directional InfraRed transmitter and a Bluetooth radio module.
    The hardware communicates the switch presses to the iOS device. With Switch Control enabled the user can use scanning to control their device. If the user launches the HouseMate App a grid of environmental control options is presented. If the user chooses an option then the HouseMate App will either run a HomeKit scene, control a HomeKit accessory or instruct the HouseMate hardware to transmit a pre-recorded InfraRed signal.
    HouseMate can be fitted with a radio frequency Nurse call pager. This alarm can be activated at anytime by pressing the switch for a defined period of time. Importantly this feature is independent of the iOS device and Bluetooth connection.
    A further possibility is the control of EasyWave or Z-wave devices. On request HouseMate can be fitted with an internal EasyWave or Z-wave transmitter.
    TELL ME ABOUT THE APP
    The HouseMate app that has been specially designed for switch access and can be downloaded free from iTunes. It will run on any iOS device running 8.4 or higher.
    The app presents a grid of environmental control functions using icons and text. When the user chooses an icon the app either executes a HomeKit function or instructs the hardware to transmit a signal. The HouseMate app communicates with the HouseMate hardware using Bluetooth Smart.
    Rather than having to switch between different apps the HouseMate app enables you to have all your environmental control functions in one easy-to-use, graphically based interface.
    WHAT ARE THE
    KEY FEATURES?
    Hardware features:
    -Control of any device that can be operated by InfraRed signals including light switches, power sockets, bed controls and door openers.
    -Powerful InfraRed learn/transmit hardware. Single codes, toggle codes, macros and safety codes can be recorded.
    -Pre-recorded database of common InfraRed signals including GEWA, Possum, Siemens KNX, FellerBeamIt, UPC and SKY.
    -Control of EasyWave devices with optional built-in EasyWave transmitter.
    -Control of Z-wave devices with optional built-in Z-wave transmitter.
    -Single switch, two switch and joystick inputs.
    Interface cables for R-Net and DX wheelchair control systems.
    -Long-life rechargeable Li-Ion battery with mini USB charger.
    -Audible low battery warning, Bluetooth connection, InfraRed transmit and charging status LEDs.
    Software features:
    -Comprehensive, graphic based, environmental control.
    -Large database of icons as well as the ability to choose images from the camera roll.
    -Designed to be used in conjunction with the scanning features of iOS Switch Control.
    -Can be used to run HomeKit scenes and control HomeKit accessories.
    -Control over third party apps using iOS Switch Control.
    -Can be used in conjunction with IFTTT based services.
    -HouseMate can be downloaded free from iTunes with automatic updating as new versions become available.
    -Can be installed on iPads or iPhones running iOS 8.4 or higher.

  • 版本3.9
    2020-04-06
    更新日志

    Software patch for iOS 13.4

    截图
    应用描述

    Imagine being able to control everything from one device: Turn on your room lights and close the curtains. Change channels on your TV and turn up the heating. Answer a phone call and send some texts. Browse the Internet, play some music or watch YouTube. HouseMate hardware in combination with an iOS device enables you to do this and much more.
    HOW DOES IT WORK?
    HouseMate is a combined hardware/app solution that enables a switch user to fully control their iOS device and use it to operate other equipment in their home or work environment using a combination of InfraRed, HomeKit, IFTTT and other technologies.
    TELL ME ABOUT
    THE HARDWARE
    The hardware is controlled using the built-in switch or by connecting an external switch or joystick. It can also be interfaced to R-Net and DX wheelchair control systems.
    It is powered by a rechargeable Li-Ion battery and contains a powerful omni- directional InfraRed transmitter and a Bluetooth radio module.
    The hardware communicates the switch presses to the iOS device. With Switch Control enabled the user can use scanning to control their device. If the user launches the HouseMate App a grid of environmental control options is presented. If the user chooses an option then the HouseMate App will either run a HomeKit scene, control a HomeKit accessory or instruct the HouseMate hardware to transmit a pre-recorded InfraRed signal.
    HouseMate can be fitted with a radio frequency Nurse call pager. This alarm can be activated at anytime by pressing the switch for a defined period of time. Importantly this feature is independent of the iOS device and Bluetooth connection.
    A further possibility is the control of EasyWave or Z-wave devices. On request HouseMate can be fitted with an internal EasyWave or Z-wave transmitter.
    TELL ME ABOUT THE APP
    The HouseMate app that has been specially designed for switch access and can be downloaded free from iTunes. It will run on any iOS device running 8.4 or higher.
    The app presents a grid of environmental control functions using icons and text. When the user chooses an icon the app either executes a HomeKit function or instructs the hardware to transmit a signal. The HouseMate app communicates with the HouseMate hardware using Bluetooth Smart.
    Rather than having to switch between different apps the HouseMate app enables you to have all your environmental control functions in one easy-to-use, graphically based interface.
    WHAT ARE THE
    KEY FEATURES?
    Hardware features:
    -Control of any device that can be operated by InfraRed signals including light switches, power sockets, bed controls and door openers.
    -Powerful InfraRed learn/transmit hardware. Single codes, toggle codes, macros and safety codes can be recorded.
    -Pre-recorded database of common InfraRed signals including GEWA, Possum, Siemens KNX, FellerBeamIt, UPC and SKY.
    -Control of EasyWave devices with optional built-in EasyWave transmitter.
    -Control of Z-wave devices with optional built-in Z-wave transmitter.
    -Single switch, two switch and joystick inputs.
    Interface cables for R-Net and DX wheelchair control systems.
    -Long-life rechargeable Li-Ion battery with mini USB charger.
    -Audible low battery warning, Bluetooth connection, InfraRed transmit and charging status LEDs.
    Software features:
    -Comprehensive, graphic based, environmental control.
    -Large database of icons as well as the ability to choose images from the camera roll.
    -Designed to be used in conjunction with the scanning features of iOS Switch Control.
    -Can be used to run HomeKit scenes and control HomeKit accessories.
    -Control over third party apps using iOS Switch Control.
    -Can be used in conjunction with IFTTT based services.
    -HouseMate can be downloaded free from iTunes with automatic updating as new versions become available.
    -Can be installed on iPads or iPhones running iOS 8.4 or higher.

  • 版本3.8
    2020-03-10
    更新日志

    Ziggo Next signal database added

    截图
    应用描述

    Imagine being able to control everything from one device: Turn on your room lights and close the curtains. Change channels on your TV and turn up the heating. Answer a phone call and send some texts. Browse the Internet, play some music or watch YouTube. HouseMate hardware in combination with an iOS device enables you to do this and much more.



    HOW DOES IT WORK?

    HouseMate is a combined hardware/app solution that enables a switch user to fully control their iOS device and use it to operate other equipment in their home or work environment using a combination of InfraRed, HomeKit, IFTTT and other technologies.



    TELL ME ABOUT

    THE HARDWARE

    The hardware is controlled using the built-in switch or by connecting an external switch or joystick. It can also be interfaced to R-Net and DX wheelchair control systems.



    It is powered by a rechargeable Li-Ion battery and contains a powerful omni- directional InfraRed transmitter and a Bluetooth radio module.



    The hardware communicates the switch presses to the iOS device. With Switch Control enabled the user can use scanning to control their device. If the user launches the HouseMate App a grid of environmental control options is presented. If the user chooses an option then the HouseMate App will either run a HomeKit scene, control a HomeKit accessory or instruct the HouseMate hardware to transmit a pre-recorded InfraRed signal.



    HouseMate can be fitted with a radio frequency Nurse call pager. This alarm can be activated at anytime by pressing the switch for a defined period of time. Importantly this feature is independent of the iOS device and Bluetooth connection.



    A further possibility is the control of EasyWave or Z-wave devices. On request HouseMate can be fitted with an internal EasyWave or Z-wave transmitter.



    TELL ME ABOUT THE APP

    The HouseMate app that has been specially designed for switch access and can be downloaded free from iTunes. It will run on any iOS device running 8.4 or higher.



    The app presents a grid of environmental control functions using icons and text. When the user chooses an icon the app either executes a HomeKit function or instructs the hardware to transmit a signal. The HouseMate app communicates with the HouseMate hardware using Bluetooth Smart.



    Rather than having to switch between different apps the HouseMate app enables you to have all your environmental control functions in one easy-to-use, graphically based interface.



    WHAT ARE THE

    KEY FEATURES?



    Hardware features:

    -Control of any device that can be operated by InfraRed signals including light switches, power sockets, bed controls and door openers.

    -Powerful InfraRed learn/transmit hardware. Single codes, toggle codes, macros and safety codes can be recorded.

    -Pre-recorded database of common InfraRed signals including GEWA, Possum, Siemens KNX, FellerBeamIt, UPC and SKY.

    -Control of EasyWave devices with optional built-in EasyWave transmitter.

    -Control of Z-wave devices with optional built-in Z-wave transmitter.

    -Single switch, two switch and joystick inputs.

    Interface cables for R-Net and DX wheelchair control systems.

    -Long-life rechargeable Li-Ion battery with mini USB charger.

    -Audible low battery warning, Bluetooth connection, InfraRed transmit and charging status LEDs.



    Software features:

    -Comprehensive, graphic based, environmental control.

    -Large database of icons as well as the ability to choose images from the camera roll.

    -Designed to be used in conjunction with the scanning features of iOS Switch Control.

    -Can be used to run HomeKit scenes and control HomeKit accessories.

    -Control over third party apps using iOS Switch Control.

    -Can be used in conjunction with IFTTT based services.

    -HouseMate can be downloaded free from iTunes with automatic updating as new versions become available.

    -Can be installed on iPads or iPhones running iOS 8.4 or higher.

  • 版本3.7
    2019-12-20
    更新日志

    Auto-repeating InfraRed codes

    Composition grids

    New scanning options

    Bluetooth security texts added

    截图
    应用描述

    Imagine being able to control everything from one device: Turn on your room lights and close the curtains. Change channels on your TV and turn up the heating. Answer a phone call and send some texts. Browse the Internet, play some music or watch YouTube. HouseMate hardware in combination with an iOS device enables you to do this and much more.



    HOW DOES IT WORK?

    HouseMate is a combined hardware/app solution that enables a switch user to fully control their iOS device and use it to operate other equipment in their home or work environment using a combination of InfraRed, HomeKit, IFTTT and other technologies.



    TELL ME ABOUT

    THE HARDWARE

    The hardware is controlled using the built-in switch or by connecting an external switch or joystick. It can also be interfaced to R-Net and DX wheelchair control systems.



    It is powered by a rechargeable Li-Ion battery and contains a powerful omni- directional InfraRed transmitter and a Bluetooth radio module.



    The hardware communicates the switch presses to the iOS device. With Switch Control enabled the user can use scanning to control their device. If the user launches the HouseMate App a grid of environmental control options is presented. If the user chooses an option then the HouseMate App will either run a HomeKit scene, control a HomeKit accessory or instruct the HouseMate hardware to transmit a pre-recorded InfraRed signal.



    HouseMate can be fitted with a radio frequency Nurse call pager. This alarm can be activated at anytime by pressing the switch for a defined period of time. Importantly this feature is independent of the iOS device and Bluetooth connection.



    A further possibility is the control of EasyWave or Z-wave devices. On request HouseMate can be fitted with an internal EasyWave or Z-wave transmitter.



    TELL ME ABOUT THE APP

    The HouseMate app that has been specially designed for switch access and can be downloaded free from iTunes. It will run on any iOS device running 8.4 or higher.



    The app presents a grid of environmental control functions using icons and text. When the user chooses an icon the app either executes a HomeKit function or instructs the hardware to transmit a signal. The HouseMate app communicates with the HouseMate hardware using Bluetooth Smart.



    Rather than having to switch between different apps the HouseMate app enables you to have all your environmental control functions in one easy-to-use, graphically based interface.



    WHAT ARE THE

    KEY FEATURES?



    Hardware features:

    -Control of any device that can be operated by InfraRed signals including light switches, power sockets, bed controls and door openers.

    -Powerful InfraRed learn/transmit hardware. Single codes, toggle codes, macros and safety codes can be recorded.

    -Pre-recorded database of common InfraRed signals including GEWA, Possum, Siemens KNX, FellerBeamIt, UPC and SKY.

    -Control of EasyWave devices with optional built-in EasyWave transmitter.

    -Control of Z-wave devices with optional built-in Z-wave transmitter.

    -Single switch, two switch and joystick inputs.

    Interface cables for R-Net and DX wheelchair control systems.

    -Long-life rechargeable Li-Ion battery with mini USB charger.

    -Audible low battery warning, Bluetooth connection, InfraRed transmit and charging status LEDs.



    Software features:

    -Comprehensive, graphic based, environmental control.

    -Large database of icons as well as the ability to choose images from the camera roll.

    -Designed to be used in conjunction with the scanning features of iOS Switch Control.

    -Can be used to run HomeKit scenes and control HomeKit accessories.

    -Control over third party apps using iOS Switch Control.

    -Can be used in conjunction with IFTTT based services.

    -HouseMate can be downloaded free from iTunes with automatic updating as new versions become available.

    -Can be installed on iPads or iPhones running iOS 8.4 or higher.

  • 版本3.6
    2019-12-16
    更新日志

    Auto-repeating InfraRed codes

    Composition grids

    New scanning options

    截图
    应用描述

    Imagine being able to control everything from one device: Turn on your room lights and close the curtains. Change channels on your TV and turn up the heating. Answer a phone call and send some texts. Browse the Internet, play some music or watch YouTube. HouseMate hardware in combination with an iOS device enables you to do this and much more.



    HOW DOES IT WORK?

    HouseMate is a combined hardware/app solution that enables a switch user to fully control their iOS device and use it to operate other equipment in their home or work environment using a combination of InfraRed, HomeKit, IFTTT and other technologies.



    TELL ME ABOUT

    THE HARDWARE

    The hardware is controlled using the built-in switch or by connecting an external switch or joystick. It can also be interfaced to R-Net and DX wheelchair control systems.



    It is powered by a rechargeable Li-Ion battery and contains a powerful omni- directional InfraRed transmitter and a Bluetooth radio module.



    The hardware communicates the switch presses to the iOS device. With Switch Control enabled the user can use scanning to control their device. If the user launches the HouseMate App a grid of environmental control options is presented. If the user chooses an option then the HouseMate App will either run a HomeKit scene, control a HomeKit accessory or instruct the HouseMate hardware to transmit a pre-recorded InfraRed signal.



    HouseMate can be fitted with a radio frequency Nurse call pager. This alarm can be activated at anytime by pressing the switch for a defined period of time. Importantly this feature is independent of the iOS device and Bluetooth connection.



    A further possibility is the control of EasyWave or Z-wave devices. On request HouseMate can be fitted with an internal EasyWave or Z-wave transmitter.



    TELL ME ABOUT THE APP

    The HouseMate app that has been specially designed for switch access and can be downloaded free from iTunes. It will run on any iOS device running 8.4 or higher.



    The app presents a grid of environmental control functions using icons and text. When the user chooses an icon the app either executes a HomeKit function or instructs the hardware to transmit a signal. The HouseMate app communicates with the HouseMate hardware using Bluetooth Smart.



    Rather than having to switch between different apps the HouseMate app enables you to have all your environmental control functions in one easy-to-use, graphically based interface.



    WHAT ARE THE

    KEY FEATURES?



    Hardware features:

    -Control of any device that can be operated by InfraRed signals including light switches, power sockets, bed controls and door openers.

    -Powerful InfraRed learn/transmit hardware. Single codes, toggle codes, macros and safety codes can be recorded.

    -Pre-recorded database of common InfraRed signals including GEWA, Possum, Siemens KNX, FellerBeamIt, UPC and SKY.

    -Control of EasyWave devices with optional built-in EasyWave transmitter.

    -Control of Z-wave devices with optional built-in Z-wave transmitter.

    -Single switch, two switch and joystick inputs.

    Interface cables for R-Net and DX wheelchair control systems.

    -Long-life rechargeable Li-Ion battery with mini USB charger.

    -Audible low battery warning, Bluetooth connection, InfraRed transmit and charging status LEDs.



    Software features:

    -Comprehensive, graphic based, environmental control.

    -Large database of icons as well as the ability to choose images from the camera roll.

    -Designed to be used in conjunction with the scanning features of iOS Switch Control.

    -Can be used to run HomeKit scenes and control HomeKit accessories.

    -Control over third party apps using iOS Switch Control.

    -Can be used in conjunction with IFTTT based services.

    -HouseMate can be downloaded free from iTunes with automatic updating as new versions become available.

    -Can be installed on iPads or iPhones running iOS 8.4 or higher.

  • 版本3.5
    2018-09-22
    更新日志

    New codes added to InfraRed signal databases

    截图
    应用描述

    Imagine being able to control everything from one device: Turn on your room lights and close the curtains. Change channels on your TV and turn up the heating. Answer a phone call and send some texts. Browse the Internet, play some music or watch YouTube. HouseMate hardware in combination with an iOS device enables you to do this and much more.



    HOW DOES IT WORK?

    HouseMate is a combined hardware/app solution that enables a switch user to fully control their iOS device and use it to operate other equipment in their home or work environment using a combination of InfraRed, HomeKit, IFTTT and other technologies.



    TELL ME ABOUT

    THE HARDWARE

    The hardware is controlled using the built-in switch or by connecting an external switch or joystick. It can also be interfaced to R-Net and DX wheelchair control systems.



    It is powered by a rechargeable Li-Ion battery and contains a powerful omni- directional InfraRed transmitter and a Bluetooth radio module.



    The hardware communicates the switch presses to the iOS device. With Switch Control enabled the user can use scanning to control their device. If the user launches the HouseMate App a grid of environmental control options is presented. If the user chooses an option then the HouseMate App will either run a HomeKit scene, control a HomeKit accessory or instruct the HouseMate hardware to transmit a pre-recorded InfraRed signal.



    HouseMate can be fitted with a radio frequency Nurse call pager. This alarm can be activated at anytime by pressing the switch for a defined period of time. Importantly this feature is independent of the iOS device and Bluetooth connection.



    A further possibility is the control of EasyWave or Z-wave devices. On request HouseMate can be fitted with an internal EasyWave or Z-wave transmitter.



    TELL ME ABOUT THE APP

    The HouseMate app that has been specially designed for switch access and can be downloaded free from iTunes. It will run on any iOS device running 8.4 or higher.



    The app presents a grid of environmental control functions using icons and text. When the user chooses an icon the app either executes a HomeKit function or instructs the hardware to transmit a signal. The HouseMate app communicates with the HouseMate hardware using Bluetooth Smart.



    Rather than having to switch between different apps the HouseMate app enables you to have all your environmental control functions in one easy-to-use, graphically based interface.



    WHAT ARE THE

    KEY FEATURES?



    Hardware features:

    -Control of any device that can be operated by InfraRed signals including light switches, power sockets, bed controls and door openers.

    -Powerful InfraRed learn/transmit hardware. Single codes, toggle codes, macros and safety codes can be recorded.

    -Pre-recorded database of common InfraRed signals including GEWA, Possum, Siemens KNX, FellerBeamIt, UPC and SKY.

    -Control of EasyWave devices with optional built-in EasyWave transmitter.

    -Control of Z-wave devices with optional built-in Z-wave transmitter.

    -Single switch, two switch and joystick inputs.

    Interface cables for R-Net and DX wheelchair control systems.

    -Long-life rechargeable Li-Ion battery with mini USB charger.

    -Audible low battery warning, Bluetooth connection, InfraRed transmit and charging status LEDs.



    Software features:

    -Comprehensive, graphic based, environmental control.

    -Large database of icons as well as the ability to choose images from the camera roll.

    -Designed to be used in conjunction with the scanning features of iOS Switch Control.

    -Can be used to run HomeKit scenes and control HomeKit accessories.

    -Control over third party apps using iOS Switch Control.

    -Can be used in conjunction with IFTTT based services.

    -HouseMate can be downloaded free from iTunes with automatic updating as new versions become available.

    -Can be installed on iPads or iPhones running iOS 8.4 or higher.

  • 版本3.3
    2018-04-17
    更新日志

    IFTTT Webhooks support re-instated.

  • 版本3.1
    2018-03-29
    更新日志

    Updates for HouseMate S devices

    IFTTT no longer supported

    Z-Wave over Wifi no longer supported for new projects

  • 版本3.0
    2017-11-02
    更新日志

    Localised into Swedish

    Supports Voice Recognition

  • 版本2.9
    2017-05-03
    更新日志

    Updates for HomeKit support: You can now program the buttons in the HouseMate grids to run HomeKit scenes and control HomeKit accessories.

    Toggle option for iOS keyboard added.

    • 1
    • 2
    • 3