This app is for configuring BLHeli_32 ESCs.
The app requires that your device supports USB host mode (OTG).
It supports the following USB connections to ESC(s):
- USB connected flight controller (FC) that supports BLHeli_32 passthrough
- USB adapter with CP210x, FT232 or CH34x USB to UART device
- USB connected Arduino programmed for BLHeli bootloader
The app also supports connection to FC via SpeedyBee Bluetooth devices
Added support for more MCUs
This app is for configuring BLHeli_32 ESCs.
The app requires that your device supports USB host mode (OTG).
It supports the following USB connections to ESC(s):
- USB connected flight controller (FC) that supports BLHeli_32 passthrough
- USB adapter with CP210x, FT232 or CH34x USB to UART device
- USB connected Arduino programmed for BLHeli bootloader
The app also supports connection to FC via SpeedyBee Bluetooth devices
Removed use of background location
This app is for configuring BLHeli_32 ESCs.
The app requires that your device supports USB host mode (OTG).
It supports the following USB connections to ESC(s):
- USB connected flight controller (FC) that supports BLHeli_32 passthrough
- USB adapter with CP210x, FT232 or CH34x USB to UART device
- USB connected Arduino programmed for BLHeli bootloader
The app also supports connection to FC via SpeedyBee Bluetooth devices
Update for Android 10 BLE and Ardupilot
This app is for configuring BLHeli_32 ESCs.
The app requires that your device supports USB host mode (OTG).
It supports the following USB connections to ESC(s):
- USB connected flight controller (FC) that supports BLHeli_32 passthrough
- USB adapter with CP210x, FT232 or CH34x USB to UART device
- USB connected Arduino programmed for BLHeli bootloader
The app also supports connection to FC via SpeedyBee Bluetooth devices
Added support for more MCUs
This app is for configuring BLHeli_32 ESCs.
The app requires that your device supports USB host mode (OTG).
It supports the following USB connections to ESC(s):
- USB connected flight controller (FC) that supports BLHeli_32 passthrough
- USB adapter with CP210x, FT232 or CH34x USB to UART device
- USB connected Arduino programmed for BLHeli bootloader
The app also supports connection to FC via SpeedyBee Bluetooth devices
Added support for variable pwm frequency, and more MCU devices
This app is for configuring BLHeli_32 ESCs.
The app requires that your device supports USB host mode (OTG).
It supports the following USB connections to ESC(s):
- USB connected flight controller (FC) that supports BLHeli_32 passthrough
- USB adapter with CP210x, FT232 or CH34x USB to UART device
- USB connected Arduino programmed for BLHeli bootloader
The app also supports connection to FC via SpeedyBee Bluetooth devices