FORScan Lite application was developed specially for a computer diagnostic of Ford, Mazda, Lincoln and Mercury vehicles.

Supported adapters:
- OBDLink MX+ (recommended)
- vLinker FD BT (recommended)
- other ELM327-compatible BT or WiFi adapter (not recommended). Attention: this application may not work properly in case of bad quality ELM327 adapter used!
- USB adapters are also supported, but using it doesn't provide any significant benefits because USB in Android devices is usually slow and also because FORScan Lite contains no "heavy" configuration and programming functions.

Supported cars:
- Ford, Lincoln, Mercury models of 1996 - 2022MY (some models of 1994-1995MY are also supported)
- Mazda models of 1996 - 2022MY. Attention: Mazda 7G models (new Mazda 3, CX-30, MX-30, CX-50 etc) are supported partially or not supported!
- Vehicles other than Ford, Mazda, Lincoln, Mercury are not supported!

Features:
- Analyzing an on-board network configuration of the connected vehicle.
- Read and reset diagnostic trouble codes (DTC) for all modules.
- Read sensors and other data (PIDs) from all modules.
- Running manufacturer-specific functions, including tests and service functions.

Note: Configuration and Programming functions, as well as some of service functions, are not available in FORScan Lite.

FORScan Lite application was developed specially for a computer diagnostic of Ford, Mazda, Lincoln and Mercury vehicles.

Supported adapters:
- OBDLink MX+ (recommended)
- vLinker FD BT (recommended)
- other ELM327-compatible BT or WiFi adapter (not recommended). Attention: this application may not work properly in case of bad quality ELM327 adapter used!
- USB adapters are also supported, but using it doesn't provide any significant benefits because USB in Android devices is usually slow and also because FORScan Lite contains no "heavy" configuration and programming functions.

Supported cars:
- Ford, Lincoln, Mercury models of 1996 - 2022MY (some models of 1994-1995MY are also supported)
- Mazda models of 1996 - 2022MY. Attention: Mazda 7G models (new Mazda 3, CX-30, MX-30, CX-50 etc) are supported partially or not supported!
- Vehicles other than Ford, Mazda, Lincoln, Mercury are not supported!

Features:
- Analyzing an on-board network configuration of the connected vehicle.
- Read and reset diagnostic trouble codes (DTC) for all modules.
- Read sensors and other data (PIDs) from all modules.
- Running manufacturer-specific functions, including tests and service functions.

Note: Configuration and Programming functions, as well as some of service functions, are not available in FORScan Lite.

FORScan Lite application was developed specially for a computer diagnostic of Ford, Mazda, Lincoln and Mercury vehicles.
Requirements and limitations:
- ELM327 or compatible OBDII adapter with Bluetooth, WiFi or USB interface.
- Recommended adapters: OBDLink MX+, vLinker FD BT.
- Attention: vehicles other than Ford, Mazda, Lincoln and Mercury are not supported!
- Attention: application will not work with ELM327 clones of poor quality!
- Attention: application doesn\u0027t contain any configuration and programming functions!
Features:
- Analyzing an on-board network configuration of the connected vehicle.
- Read and reset diagnostic trouble codes (DTC) for all modules.
- Read sensors and other data (PIDs) from all modules.
- Running manufacturer-specific functions, including tests and service functions.

FORScan Lite application was developed specially for a computer diagnostic of Ford, Mazda, Lincoln and Mercury vehicles.
Requirements and limitations:
- ELM327 or compatible OBDII adapter with Bluetooth, WiFi or USB interface.
- Recommended adapters: OBDLink MX+, vLinker FD BT.
- Attention: vehicles other than Ford, Mazda, Lincoln and Mercury are not supported!
- Attention: application will not work with ELM327 clones of poor quality!
- Attention: application doesn\u0027t contain any configuration and programming functions!
Features:
- Analyzing an on-board network configuration of the connected vehicle.
- Read and reset diagnostic trouble codes (DTC) for all modules.
- Read sensors and other data (PIDs) from all modules.
- Running manufacturer-specific functions, including tests and service functions.

FORScan Lite application was developed specially for a computer diagnostic of Ford, Mazda, Lincoln and Mercury vehicles.
Requirements and limitations:
- ELM327 or compatible OBDII adapter with Bluetooth, WiFi or USB interface.
- Recommended adapters: OBDLink MX+, vLinker FD BT.
- Attention: vehicles other than Ford, Mazda, Lincoln and Mercury are not supported!
- Attention: application will not work with ELM327 clones of poor quality!
- Attention: application doesn\u0027t contain any configuration and programming functions!
Features:
- Analyzing an on-board network configuration of the connected vehicle.
- Read and reset diagnostic trouble codes (DTC) for all modules.
- Read sensors and other data (PIDs) from all modules.
- Running manufacturer-specific functions, including tests and service functions.

FORScan Lite application was developed specially for a computer diagnostic of Ford, Mazda, Lincoln and Mercury vehicles.
Requirements and limitations:
- ELM327 or compatible OBDII adapter with Bluetooth, WiFi or USB interface.
- Recommended adapters: OBDLink MX+, vLinker FD BT.
- Attention: vehicles other than Ford, Mazda, Lincoln and Mercury are not supported!
- Attention: application will not work with ELM327 clones of poor quality!
- Attention: application doesn\u0027t contain any configuration and programming functions!
Features:
- Analyzing an on-board network configuration of the connected vehicle.
- Read and reset diagnostic trouble codes (DTC) for all modules.
- Read sensors and other data (PIDs) from all modules.
- Running manufacturer-specific functions, including tests and service functions.

FORScan Lite application was developed specially for a computer diagnostic of Ford, Mazda, Lincoln and Mercury vehicles.
Requirements and limitations:
- ELM327 or compatible OBDII adapter with Bluetooth, WiFi or USB interface.
- Recommended adapters: OBDLink MX+, vLinker FD BT.
- Attention: vehicles other than Ford, Mazda, Lincoln and Mercury are not supported!
- Attention: application will not work with ELM327 clones of poor quality!
- Attention: application doesn\u0027t contain any configuration and programming functions!
Features:
- Analyzing an on-board network configuration of the connected vehicle.
- Read and reset diagnostic trouble codes (DTC) for all modules.
- Read sensors and other data (PIDs) from all modules.
- Running manufacturer-specific functions, including tests and service functions.

FORScan Lite application was developed specially for a computer diagnostic of Ford, Mazda, Lincoln and Mercury vehicles.
Requirements and limitations:
- ELM327 or compatible OBDII adapter with Bluetooth, WiFi or USB interface.
- Recommended adapters: OBDLink MX+, vLinker FD BT.
- Attention: vehicles other than Ford, Mazda, Lincoln and Mercury are not supported!
- Attention: application will not work with ELM327 clones of poor quality!
- Attention: application doesn't contain any configuration and programming functions!
Features:
- Analyzing an on-board network configuration of the connected vehicle.
- Read and reset diagnostic trouble codes (DTC) for all modules.
- Read sensors and other data (PIDs) from all modules.
- Running manufacturer-specific functions, including tests and service functions.

FORScan Lite application was developed specially for a computer diagnostic of Ford, Mazda, Lincoln and Mercury vehicles.
Requirements and limitations:
- ELM327 or compatible OBDII adapter with Bluetooth, WiFi or USB interface.
- Recommended adapters: OBDLink MX+, vLinker FD BT.
- Attention: vehicles other than Ford, Mazda, Lincoln and Mercury are not supported!
- Attention: application will not work with ELM327 clones of poor quality!
- Attention: application doesn't contain any configuration and programming functions!
Features:
- Analyzing an on-board network configuration of the connected vehicle.
- Read and reset diagnostic trouble codes (DTC) for all modules.
- Read sensors and other data (PIDs) from all modules.
- Running manufacturer-specific functions, including tests and service functions.