- 全球最早版本上线日期2015-04-01
- 最新版本2.3
- 最新版本上线距今161天4小时
- 近1年版本更新次数2
版本时间线
- -
版本记录
- 版本: 2.32023-10-20大小:3.06M更新日志
Minor adjustment to the calculation model of some engines after testing on the dynamometer. Engines are updated up to 2024.
截图应用描述This app will help you configure the carb of your 2-strokes Yamaha YZ bike (PW 50, PW 80, YZ 65, YZ 80, YZ 85, YZ 125, YZ 125 X, YZ 250, YZ 250 X) to improve its performance. Using temperature, altitude, humidity, atmospheric pressure and oil-mix ratio, the app will show you a recommendation about jetting to your specific bike, so it can be useful to get a spot-on configuration and adapt it to the weather changes.
In order to get the weather values, the application can use the GPS to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS and internet connection, in this case, the user has to give the altitude and weather data.
The application is made up of four tabs that are described next:
- Results: in this tab, the recommended main jet, needle type and clip position, pilot jet and air screw position are shown. These data are calculated depending on the weather conditions and the engine configuration introduced in the next tabs. In addition, this tab lets to make a fine tuning adjustment to adapt to a concrete engine.
- Weather: you can set the values for current temperature, altitude, pressure and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).
- Engine: you must set in this screen the information about the engine, that is, the year, region, model and carburetor, and the oil mix ratio that you're using.
- GPS: this tab allows to use the GPS to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).
The application can manage different measure units: meters and feet for altitude, ºC and ºF for temperatures, mb, hPa, inHg, mmHg for pressure.
Yamaha YZ models that are included:
- PW50 from 1995 to 2024.
- PW80 from 1995 to 2024.
- YZ65 from 2018 to 2024.
- YZ80 / YZ85 from 1995 to 2024.
- YZ125 from 1995 to 2024.
- YZ125X from 2016 to 2024.
- YZ250 from 1995 to 2024.
- YZ250X from 2016 to 2024. - 版本: 2.22023-08-17大小:3.07M更新日志
Models are updated up to the year 2024, and some errors are corrected, such as in the form to input altitude.
截图应用描述This app will help you configure the carb of your 2-strokes Yamaha YZ bike (PW 50, PW 80, YZ 65, YZ 80, YZ 85, YZ 125, YZ 125 X, YZ 250, YZ 250 X) to improve its performance. Using temperature, altitude, humidity, atmospheric pressure and oil-mix ratio, the app will show you a recommendation about jetting to your specific bike, so it can be useful to get a spot-on configuration and adapt it to the weather changes.
In order to get the weather values, the application can use the GPS to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS and internet connection, in this case, the user has to give the altitude and weather data.
The application is made up of four tabs that are described next:
- Results: in this tab, the recommended main jet, needle type and clip position, pilot jet and air screw position are shown. These data are calculated depending on the weather conditions and the engine configuration introduced in the next tabs. In addition, this tab lets to make a fine tuning adjustment to adapt to a concrete engine.
- Weather: you can set the values for current temperature, altitude, pressure and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).
- Engine: you must set in this screen the information about the engine, that is, the year, region, model and carburetor, and the oil mix ratio that you're using.
- GPS: this tab allows to use the GPS to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).
The application can manage different measure units: meters and feet for altitude, ºC and ºF for temperatures, mb, hPa, inHg, mmHg for pressure.
Yamaha YZ models that are included:
- PW50 from 1995 to 2024.
- PW80 from 1995 to 2024.
- YZ65 from 2018 to 2024.
- YZ80 / YZ85 from 1995 to 2024.
- YZ125 from 1995 to 2024.
- YZ125X from 2016 to 2024.
- YZ250 from 1995 to 2024.
- YZ250X from 2016 to 2024. - 版本: 2.12020-10-16大小:3.08M更新日志
Added 2021 models.
Added PW50 and PW80 from 1995 to 2021截图应用描述This app will help you configure the carb of your 2-strokes Yamaha YZ bike (PW 50, PW 80, YZ 65, YZ 80, YZ 85, YZ 125, YZ 125 X, YZ 250, YZ 250 X) to improve its performance. Using temperature, altitude, humidity, atmospheric pressure and oil-mix ratio, the app will show you a recommendation about jetting to your specific bike, so it can be useful to get a spot-on configuration and adapt it to the weather changes.
In order to get the weather values, the application can use the GPS to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS and internet connection, in this case, the user has to give the altitude and weather data.
The application is made up of four tabs that are described next:
- Results: in this tab, the recommended main jet, needle type and clip position, pilot jet and air screw position are shown. These data are calculated depending on the weather conditions and the engine configuration introduced in the next tabs. In addition, this tab lets to make a fine tuning adjustment to adapt to a concrete engine.
- Weather: you can set the values for current temperature, altitude, pressure and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).
- Engine: you must set in this screen the information about the engine, that is, the year, region, model and carburetor, and the oil mix ratio that you're using.
- GPS: this tab allows to use the GPS to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).
The application can manage different measure units: meters and feet for altitude, ºC and ºF for temperatures, mb, hPa, inHg, mmHg for pressure.
Yamaha YZ models that are included:
- PW50 from 1995 to 2021.
- PW80 from 1995 to 2021.
- YZ65 from 2018 to 2021.
- YZ80 / YZ85 from 1995 to 2021.
- YZ125 from 1995 to 2021.
- YZ125X from 2016 to 2021.
- YZ250 from 1995 to 2021.
- YZ250X from 2016 to 2021. - 版本: 2.02020-04-09更新日志
Added new bikes:
- YZ125X from 2016 to 2020.
- YZ250X from 2016 to 2020.
- YZ65 from 2018.
- YZ85, YZ125 and YZ250 from 2015 to 2020.
Fine tuning functionality is improved.截图应用描述This app will help you configure the carb of your 2-strokes Yamaha YZ bike (YZ 65, YZ 80, YZ 85, YZ 125, YZ125 X, YZ 250, YZ 250 X) to improve its performance. Using temperature, altitude, humidity, atmospheric pressure and oil-mix ratio, the app will show you a recommendation about jetting to your specific bike, so it can be useful to get a spot-on configuration and adapt it to the weather changes.
In order to get the weather values, the application can use the GPS to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS and internet connection, in this case, the user has to give the altitude and weather data.
The application is made up of four tabs that are described next:
- Results: in this tab, the recommended main jet, needle type and clip position, pilot jet and air screw position are shown. These data are calculated depending on the weather conditions and the engine configuration introduced in the next tabs. In addition, this tab lets to make a fine tuning adjustment to adapt to a concrete engine.
- Weather: you can set the values for current temperature, altitude, pressure and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).
- Engine: you must set in this screen the information about the engine, that is, the year, region, model and carburetor, and the oil mix ratio that you're using.
- GPS: this tab allows to use the GPS to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).
The application can manage different measure units: meters and feet for altitude, ºC and ºF for temperatures, mb, hPa, inHg, mmHg for pressure.
Yamaha YZ models that are included:
- YZ65 from 2018 to 2020.
- YZ80 / YZ85 from 1995 to 2020.
- YZ125 from 1995 to 2020.
- YZ125X from 2016 to 2020.
- YZ250 from 1995 to 2020.
- YZ250X from 2016 to 2020. - 版本: 1.6.22020-04-03更新日志
Added new bikes:
- YZ65 from 2018.
- YZ85, YZ125 and YZ250 from 2015 to 2020.
Solves bug in dark mode.
Fixes some minor user interface bugs.截图应用描述This app will help you configure the carb of your 2-strokes Yamaha YZ bike (YZ 65, YZ 80, YZ 85, YZ 125, YZ 250) to improve its performance. Using temperature, altitude, humidity, atmospheric pressure and oil-mix ratio, the app will show you a recommendation about jetting to your specific bike, so it can be useful to get a spot-on configuration and adapt it to the weather changes.
In order to get the weather values, the application can use the GPS to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS and internet connection, in this case, the user has to give the altitude and weather data.
The application is made up of four tabs that are described next:
- Results: in this tab, the recommended main jet, needle type and clip position, pilot jet and air screw position are shown. These data are calculated depending on the weather conditions and the engine configuration introduced in the next tabs. In addition, this tab lets to make a fine tuning adjustment to adapt to a concrete engine.
- Weather: you can set the values for current temperature, altitude, pressure and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).
- Engine: you must set in this screen the information about the engine, that is, the year, region, model and carburetor, and the oil mix ratio that you're using.
- GPS: this tab allows to use the GPS to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).
The application can manage different measure units: meters and feet for altitude, ºC and ºF for temperatures, mb, hPa, inHg, mmHg for pressure.
Yamaha YZ models that are included:
- YZ65 from 2018 to 2020.
- YZ80 / YZ85 from 1995 to 2020.
- YZ125 from 1995 to 2020.
- YZ250 from 1995 to 2020. - 版本: 1.6.12020-03-04更新日志
Added new bikes:
- YZ65 from 2018.
- YZ85, YZ125 and YZ250 from 2015 to 2020.
Solves bug in dark mode.截图应用描述This app will help you configure the carb of your 2-strokes Yamaha YZ bike (YZ 65, YZ 80, YZ 85, YZ 125, YZ 250) to improve its performance. Using temperature, altitude, humidity, atmospheric pressure and oil-mix ratio, the app will show you a recommendation about jetting to your specific bike, so it can be useful to get a spot-on configuration and adapt it to the weather changes.
In order to get the weather values, the application can use the GPS to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS and internet connection, in this case, the user has to give the altitude and weather data.
The application is made up of four tabs that are described next:
- Results: in this tab, the recommended main jet, needle type and clip position, pilot jet and air screw position are shown. These data are calculated depending on the weather conditions and the engine configuration introduced in the next tabs. In addition, this tab lets to make a fine tuning adjustment to adapt to a concrete engine.
- Weather: you can set the values for current temperature, altitude, pressure and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).
- Engine: you must set in this screen the information about the engine, that is, the year, region, model and carburetor, and the oil mix ratio that you're using.
- GPS: this tab allows to use the GPS to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).
The application can manage different measure units: meters and feet for altitude, ºC and ºF for temperatures, mb, hPa, inHg, mmHg for pressure.
Yamaha YZ models that are included:
- YZ65 from 2018 to 2020.
- YZ80 / YZ85 from 1995 to 2020.
- YZ125 from 1995 to 2020.
- YZ250 from 1995 to 2020. - 版本: 1.62020-03-01更新日志
Updated YZ85 calculations.
Added 2020 models.截图应用描述This app will help you configure the carb of your 2-strokes Yamaha YZ bike (YZ 65, YZ 80, YZ 85, YZ 125, YZ 250) to improve its performance. Using temperature, altitude, humidity, atmospheric pressure and oil-mix ratio, the app will show you a recommendation about jetting to your specific bike, so it can be useful to get a spot-on configuration and adapt it to the weather changes.
In order to get the weather values, the application can use the GPS to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS and internet connection, in this case, the user has to give the altitude and weather data.
The application is made up of four tabs that are described next:
- Results: in this tab, the recommended main jet, needle type and clip position, pilot jet and air screw position are shown. These data are calculated depending on the weather conditions and the engine configuration introduced in the next tabs. In addition, this tab lets to make a fine tuning adjustment to adapt to a concrete engine.
- Weather: you can set the values for current temperature, altitude, pressure and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).
- Engine: you must set in this screen the information about the engine, that is, the year, region, model and carburetor, and the oil mix ratio that you're using.
- GPS: this tab allows to use the GPS to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).
The application can manage different measure units: meters and feet for altitude, ºC and ºF for temperatures, mb, hPa, inHg, mmHg for pressure.
Yamaha YZ models that are included:
- YZ65 from 2018 to 2020.
- YZ80 / YZ85 from 1995 to 2020.
- YZ125 from 1995 to 2020.
- YZ250 from 1995 to 2020. - 版本: 1.52019-02-02更新日志
2016, 2017, 2018 and 2019 models are included.
YZ65 that appeared in 2018 is included.截图应用描述This app will help you configure the carb of your 2-strokes Yamaha YZ bike (YZ 65, YZ 80, YZ 85, YZ 125, YZ 250) to improve its performance. Using temperature, altitude, humidity, atmospheric pressure and oil-mix ratio, the app will show you a recommendation about jetting to your specific bike, so it can be useful to get a spot-on configuration and adapt it to the weather changes.
In order to get the weather values, the application can use the GPS to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS and internet connection, in this case, the user has to give the altitude and weather data.
The application is made up of four tabs that are described next:
- Results: in this tab, the recommended main jet, needle type and clip position, pilot jet and air screw position are shown. These data are calculated depending on the weather conditions and the engine configuration introduced in the next tabs. In addition, this tab lets to make a fine tuning adjustment to adapt to a concrete engine.
- Weather: you can set the values for current temperature, altitude, pressure and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).
- Engine: you must set in this screen the information about the engine, that is, the year, region, model and carburetor, and the oil mix ratio that you're using.
- GPS: this tab allows to use the GPS to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).
The application can manage different measure units: meters and feet for altitude, ºC and ºF for temperatures, mb, hPa, inHg, mmHg for pressure.
Yamaha YZ models that are included:
- YZ65 from 2018 to 2019.
- YZ80 / YZ85 from 1995 to 2019.
- YZ125 from 1995 to 2019.
- YZ250 from 1995 to 2018. - 版本: 1.42016-04-25更新日志
Solved bug in oil mix slider.
Improved service for obtaining weather information.
Minor changes in user interface. - 1
- 2