- 最新版本A381
- 最新版本上线距今223天14小时
- 近1年版本更新次数3
版本时间线
- -
版本记录
- 版本: A3812023-09-15更新日志
Minor updates for Android 13 compatibility.
截图应用描述JB4 Mobile is a mobile data logger and display for use with the JB4 tuner from Burger Motorsports.
To connect, simply attach the JB4 data cable to your device using an OTG cable.
***Use a good quality OTG cable to avoid connection issues.
***If you keep getting "Serial port not available" errors, 1 of these issues is probably the cause:
1) Your OTG cable is faulty
2) Your device either doesn't support OTG properly or requires a powered USB hub
3) You're using a Galaxy S6/S6 Edge (see below)
Galaxy S6/S6 Edge Owners using an OTG cable: It has come to my attention that to get these devices to work correctly, you must first connect the OTG cable to your device, THEN connect the JB4 cable, THEN open the app and connect. Not sure why these devices are so picky, but at least someone found a workaround.
JB4 Mobile allows you to monitor multiple parameters of your JB4 equipped car at once. Parameters such as boost psi, rpm, fuel trims, air/fuel ratios, ignition advance, fuel pressure and much more are all available.
Current Features:
Data Monitoring
Data logging (log files are fully compatible with JB4 Windows software)
Data Graphing
Email and rename saved logs
Read/Delete codes
View previously read codes
Modify boost/fuel mapping
Modify methanol settings
Switch maps on the fly
Auto WOT logging
GPS Speedometer
G Force Meter
JB4 Firmware Updating
Landscape Support
How to calibrate the G Force meter:
1) Make sure your device is mounted in your vehicle in a (mostly) upright position (portrait only support for now).
2) Select a G Force gauge on the display screen.
3) When the vehicle is at a complete stop on a flat surface, simply double tap on the G Force gauge.
4) When the dot is centered in the circle with the car at a flat rest you know it is calibrated.
To switch what a gauge displays, just tap and hold on that gauge and a menu will appear.
To view your max boost, simply double tap on the boost gauge (double tap again to view live boost, max boost is reset after viewing).
JB4 ® is a registered trademark of Burger Motorsports Inc ® and is used with written permission. - 版本: A3802023-09-15更新日志
Minor Google Play compatibility updates.
截图应用描述JB4 Mobile is a mobile data logger and display for use with the JB4 tuner from Burger Motorsports.
To connect, simply attach the JB4 data cable to your device using an OTG cable.
***Use a good quality OTG cable to avoid connection issues.
***If you keep getting "Serial port not available" errors, 1 of these issues is probably the cause:
1) Your OTG cable is faulty
2) Your device either doesn't support OTG properly or requires a powered USB hub
3) You're using a Galaxy S6/S6 Edge (see below)
Galaxy S6/S6 Edge Owners using an OTG cable: It has come to my attention that to get these devices to work correctly, you must first connect the OTG cable to your device, THEN connect the JB4 cable, THEN open the app and connect. Not sure why these devices are so picky, but at least someone found a workaround.
JB4 Mobile allows you to monitor multiple parameters of your JB4 equipped car at once. Parameters such as boost psi, rpm, fuel trims, air/fuel ratios, ignition advance, fuel pressure and much more are all available.
Current Features:
Data Monitoring
Data logging (log files are fully compatible with JB4 Windows software)
Data Graphing
Email and rename saved logs
Read/Delete codes
View previously read codes
Modify boost/fuel mapping
Modify methanol settings
Switch maps on the fly
Auto WOT logging
GPS Speedometer
G Force Meter
JB4 Firmware Updating
Landscape Support
How to calibrate the G Force meter:
1) Make sure your device is mounted in your vehicle in a (mostly) upright position (portrait only support for now).
2) Select a G Force gauge on the display screen.
3) When the vehicle is at a complete stop on a flat surface, simply double tap on the G Force gauge.
4) When the dot is centered in the circle with the car at a flat rest you know it is calibrated.
To switch what a gauge displays, just tap and hold on that gauge and a menu will appear.
To view your max boost, simply double tap on the boost gauge (double tap again to view live boost, max boost is reset after viewing).
JB4 ® is a registered trademark of Burger Motorsports Inc ® and is used with written permission. - 版本: A3792023-08-19更新日志
Minor Google Play compatibility updates.
截图应用描述JB4 Mobile is a mobile data logger and display for use with the JB4 tuner from Burger Motorsports.
To connect, simply attach the JB4 data cable to your device using an OTG cable.
***Use a good quality OTG cable to avoid connection issues.
***If you keep getting "Serial port not available" errors, 1 of these issues is probably the cause:
1) Your OTG cable is faulty
2) Your device either doesn't support OTG properly or requires a powered USB hub
3) You're using a Galaxy S6/S6 Edge (see below)
Galaxy S6/S6 Edge Owners using an OTG cable: It has come to my attention that to get these devices to work correctly, you must first connect the OTG cable to your device, THEN connect the JB4 cable, THEN open the app and connect. Not sure why these devices are so picky, but at least someone found a workaround.
JB4 Mobile allows you to monitor multiple parameters of your JB4 equipped car at once. Parameters such as boost psi, rpm, fuel trims, air/fuel ratios, ignition advance, fuel pressure and much more are all available.
Current Features:
Data Monitoring
Data logging (log files are fully compatible with JB4 Windows software)
Data Graphing
Email and rename saved logs
Read/Delete codes
View previously read codes
Modify boost/fuel mapping
Modify methanol settings
Switch maps on the fly
Auto WOT logging
GPS Speedometer
G Force Meter
JB4 Firmware Updating
Landscape Support
How to calibrate the G Force meter:
1) Make sure your device is mounted in your vehicle in a (mostly) upright position (portrait only support for now).
2) Select a G Force gauge on the display screen.
3) When the vehicle is at a complete stop on a flat surface, simply double tap on the G Force gauge.
4) When the dot is centered in the circle with the car at a flat rest you know it is calibrated.
To switch what a gauge displays, just tap and hold on that gauge and a menu will appear.
To view your max boost, simply double tap on the boost gauge (double tap again to view live boost, max boost is reset after viewing).
JB4 ® is a registered trademark of Burger Motorsports Inc ® and is used with written permission. - 版本: A3562023-03-09更新日志
Android 12 support.
截图应用描述JB4 Mobile is a mobile data logger and display for use with the JB4 tuner from Burger Motorsports.
To connect, simply attach the JB4 data cable to your device using an OTG cable.
***Use a good quality OTG cable to avoid connection issues.
***If you keep getting "Serial port not available" errors, 1 of these issues is probably the cause:
1) Your OTG cable is faulty
2) Your device either doesn't support OTG properly or requires a powered USB hub
3) You're using a Galaxy S6/S6 Edge (see below)
Galaxy S6/S6 Edge Owners using an OTG cable: It has come to my attention that to get these devices to work correctly, you must first connect the OTG cable to your device, THEN connect the JB4 cable, THEN open the app and connect. Not sure why these devices are so picky, but at least someone found a workaround.
JB4 Mobile allows you to monitor multiple parameters of your JB4 equipped car at once. Parameters such as boost psi, rpm, fuel trims, air/fuel ratios, ignition advance, fuel pressure and much more are all available.
Current Features:
Data Monitoring
Data logging (log files are fully compatible with JB4 Windows software)
Data Graphing
Email and rename saved logs
Read/Delete codes
View previously read codes
Modify boost/fuel mapping
Modify methanol settings
Switch maps on the fly
Auto WOT logging
GPS Speedometer
G Force Meter
JB4 Firmware Updating
Landscape Support
How to calibrate the G Force meter:
1) Make sure your device is mounted in your vehicle in a (mostly) upright position (portrait only support for now).
2) Select a G Force gauge on the display screen.
3) When the vehicle is at a complete stop on a flat surface, simply double tap on the G Force gauge.
4) When the dot is centered in the circle with the car at a flat rest you know it is calibrated.
To switch what a gauge displays, just tap and hold on that gauge and a menu will appear.
To view your max boost, simply double tap on the boost gauge (double tap again to view live boost, max boost is reset after viewing).
JB4 ® is a registered trademark of Burger Motorsports Inc ® and is used with written permission. - 版本: A3552021-11-03大小:7.8M更新日志
Fix for CSV Previews.
截图应用描述JB4 Mobile is a mobile data logger and display for use with the JB4 piggyback tuner from Burger Motorsports.
To connect, simply attach the JB4 data cable to your device using an OTG cable.
***Use a good quality OTG cable to avoid connection issues.
***If you keep getting \"Serial port not available\" errors, 1 of these issues is probably the cause:
1) Your OTG cable is faulty
2) Your device either doesn\u0027t support OTG properly or requires a powered USB hub
3) You\u0027re using a Galaxy S6/S6 Edge (see below)
Galaxy S6/S6 Edge Owners using an OTG cable: It has come to my attention that to get these devices to work correctly, you must first connect the OTG cable to your device, THEN connect the JB4 cable, THEN open the app and connect. Not sure why these devices are so picky, but at least someone found a workaround.
JB4 Mobile allows you to monitor multiple parameters of your JB4 equipped car at once. Parameters such as boost psi, rpm, fuel trims, air/fuel ratios, ignition advance, fuel pressure and much more are all available.
Current Features:
Data Monitoring
Data logging (log files are fully compatible with JB4 Windows/OS X software)
Data Graphing
Email and rename saved logs
Read/Delete codes
View previously read codes
Modify boost/fuel mapping
Modify methanol settings
Switch maps on the fly
Auto WOT logging
GPS Speedometer
G Force Meter
JB4 Firmware Updating
Landscape Support
How to calibrate the G Force meter:
1) Make sure your device is mounted in your vehicle in a (mostly) upright position (portrait only support for now).
2) Select a G Force gauge on the display screen.
3) When the vehicle is at a complete stop on a flat surface, simply double tap on the G Force gauge.
4) When the dot is centered in the circle with the car at a flat rest you know it is calibrated.
To switch what a gauge displays, just tap and hold on that gauge and a menu will appear.
To view your max boost, simply double tap on the boost gauge (double tap again to view live boost, max boost is reset after viewing).
JB4 Mobile is not affiliated with Burger Motorsports. - 版本: A3472021-09-21大小:7.4M更新日志
Updated file handling to fix email attachment errors on newer Android OS versions.
截图应用描述JB4 Mobile is a mobile data logger and display for use with the JB4 piggyback tuner from Burger Motorsports.
To connect, simply attach the JB4 data cable to your device using an OTG cable.
***Use a good quality OTG cable to avoid connection issues.
***If you keep getting \"Serial port not available\" errors, 1 of these issues is probably the cause:
1) Your OTG cable is faulty
2) Your device either doesn\u0027t support OTG properly or requires a powered USB hub
3) You\u0027re using a Galaxy S6/S6 Edge (see below)
Galaxy S6/S6 Edge Owners using an OTG cable: It has come to my attention that to get these devices to work correctly, you must first connect the OTG cable to your device, THEN connect the JB4 cable, THEN open the app and connect. Not sure why these devices are so picky, but at least someone found a workaround.
JB4 Mobile allows you to monitor multiple parameters of your JB4 equipped car at once. Parameters such as boost psi, rpm, fuel trims, air/fuel ratios, ignition advance, fuel pressure and much more are all available.
Current Features:
Data Monitoring
Data logging (log files are fully compatible with JB4 Windows/OS X software)
Data Graphing
Email and rename saved logs
Read/Delete codes
View previously read codes
Modify boost/fuel mapping
Modify methanol settings
Switch maps on the fly
Auto WOT logging
GPS Speedometer
G Force Meter
JB4 Firmware Updating
Landscape Support
How to calibrate the G Force meter:
1) Make sure your device is mounted in your vehicle in a (mostly) upright position (portrait only support for now).
2) Select a G Force gauge on the display screen.
3) When the vehicle is at a complete stop on a flat surface, simply double tap on the G Force gauge.
4) When the dot is centered in the circle with the car at a flat rest you know it is calibrated.
To switch what a gauge displays, just tap and hold on that gauge and a menu will appear.
To view your max boost, simply double tap on the boost gauge (double tap again to view live boost, max boost is reset after viewing).
JB4 Mobile is not affiliated with Burger Motorsports. - 版本: 2020-07-252020-07-25大小:7.0M更新日志
Minor logging updates.
Fixed bug with N54 Twin Turbo firmware updates.截图应用描述JB4 Mobile is a mobile data logger and display for use with the JB4 piggyback tuner from Burger Motorsports.
To connect, simply attach the JB4 data cable to your device using an OTG cable.
***Use a good quality OTG cable to avoid connection issues.
***If you keep getting "Serial port not available" errors, 1 of these issues is probably the cause:
1) Your OTG cable is faulty
2) Your device either doesn't support OTG properly or requires a powered USB hub
3) You're using a Galaxy S6/S6 Edge (see below)
Galaxy S6/S6 Edge Owners using an OTG cable: It has come to my attention that to get these devices to work correctly, you must first connect the OTG cable to your device, THEN connect the JB4 cable, THEN open the app and connect. Not sure why these devices are so picky, but at least someone found a workaround.
JB4 Mobile allows you to monitor multiple parameters of your JB4 equipped car at once. Parameters such as boost psi, rpm, fuel trims, air/fuel ratios, ignition advance, fuel pressure and much more are all available.
Current Features:
Data Monitoring
Data logging (log files are fully compatible with JB4 Windows/OS X software)
Data Graphing
Email and rename saved logs
Read/Delete codes
View previously read codes
Modify boost/fuel mapping
Modify methanol settings
Switch maps on the fly
Auto WOT logging
GPS Speedometer
G Force Meter
JB4 Firmware Updating
Landscape Support
How to calibrate the G Force meter:
1) Make sure your device is mounted in your vehicle in a (mostly) upright position (portrait only support for now).
2) Select a G Force gauge on the display screen.
3) When the vehicle is at a complete stop on a flat surface, simply double tap on the G Force gauge.
4) When the dot is centered in the circle with the car at a flat rest you know it is calibrated.
To switch what a gauge displays, just tap and hold on that gauge and a menu will appear.
To view your max boost, simply double tap on the boost gauge (double tap again to view live boost, max boost is reset after viewing).
JB4 Mobile is not affiliated with Burger Motorsports.